Sistem Pendukung Keputusan Pemilihan Mahasiswa Penerima Bantuan Uang Kuliah Tunggal Menggunakan Metode Simple Additive Weighting (SAW)
Keywords:
Sistem Pendukung Keputusan; Uang Kuliah Tunggal; SAWAbstract
Single Tuition Assistance (UKT) is a government program to help students who are academically capable and economically disadvantaged. The form of UKT assistance provided by the government to recipient students is tuition assistance which is transferred directly to the university's account. This assistance is intended for underprivileged students. In order for the provision of UKT assistance to be right on target, the selection in receiving aid must be better and objective in accordance with predetermined criteria. However, universities often face several problems in the selection process, which is carried out in stages so that it takes quite a long time. Therefore, a decision support system is needed as a solution to these problems by applying the Simple Additive Weighting (SAW) method. The test results obtained that the best alternative that was considered worthy as a student receiving UKT assistance was in alternative A4 on behalf of Khairunnisa which resulted in the best preference value of 0.8865 as the first rank.
Downloads
References
E. Buulolo, R. Syahputra, and A. Fau, “Algoritma K-Medoids Untuk Menentukan Calon Mahasiswa Yang Layak Mendapatkan Beasiswa Bidikmisi di Universitas Budi Darma,” J. Media Inform. Budidarma, vol. 4, no. 3, p. 797, 2020.
N. W. H. Ulloh, U. D. Rosiani, and E. L. Amalia, “Implementasi Metode Topsis Dalam Sistem Pendukung Keputusan Keringanan UKT (Studi Kasus?: STIT Madina Sragen),” Smatika J., vol. 11, no. 01, pp. 27–31, 2021.
Y. Kusnadi and M. W. Dwiyansyah, “Sistem Pendukung Keputusan Untuk Penerimaan Beasiswa Dengan Metode Simple Additive Weighting ( SAW ) Pada Smkn 1 Ciomas Kabupaten Bogor,” J. Teknol. Inform. dan Komput. MH Thamrin, vol. 6, no. 1, pp. 120–131, 2020.
D. A. Putri, “Sistem Pendukung Keputusan Menentukan Penerima Beasiswa Berprestasi Pada Program Studi Teknik Informatika Dengan Menggunakan Metode Simple Additive Weighting,” J. Chem. Inf. Model., vol. 3, no. 1, pp. 12–27, 2020.
N. Rasjid, S. Cokrowibowo, and D. M. Sari, “Sistem Pendukung Keputusan Pemberian Beasiswa menggunakan Metode FMADM dan WP,” vol. 1, no. 2, 2019.
A. Herdiansah, “Sistem Pendukung Keputusan Referensi Pemilihan Tujuan Jurusan Teknik Di Perguruan Tinggi Bagi Siswa Kelas Xii Ipa Mengunakan Metode Ahp,” MATRIK J. Manajemen, Tek. Inform. dan Rekayasa Komput., vol. 19, no. 2, pp. 223–234, 2020.
A. Wanto and H. Damanik, “Analisis Penerapan Sistem Pendukung Keputusan Terhadap Seleksi Penerima Beasiswa BBM ( Bantuan Belajar Mahasiswa ) Pada Perguruan Tinggi Menggunakan Metode Simple Additive Weighting ( SAW ) ( Studi Kasus?: AMIK Tunas Bangsa Pematangsiantar ),” no. November, pp. 323–333, 2015.
R. Taufik, R. Destriana, and A. P. Suyitno, “Sistem Pendukung Keputusan Penerima Beasiswa Berbasis WEB Menggunakan Metode Simple Additive Weighting ( SAW ) pada Pondok Pesantren Daarul Ahsan,” vol. 5, no. 1, pp. 54–60, 2020.
F. N. Khasanah and S. Rofiah, “Sistem Seleksi Penerimaan Beasiswa Menggunakan Metode Pendukung Keputusan Simple Additive Weighting,” pp. 118–125, 2019.
Y. Rohmatin, W. Kusrini, and A. Noor, “Sistem Pendukung Keputusan Penentuan Calon Penerima Beasiswa Menggunakan Metode Simple Additive Weighting ( SAW ) Berbasis Web,” vol. 6, pp. 102–111, 2020.
S. Astuti and Muammar, “Sistem Pendukung Keputusan Penentuan Beasiswa Menggunakan Metode Simple Additive Weighting (SAW) Studi Kasus Pada SMP Dharma Bhakti Pubian,” J. TAM ( Technol. Accept. Model ), vol. 4, no. 1, pp. 13–18, 2015.
Sarwandi et al., Sistem Pendukung Keputusan, 1st ed. Medan: CV Graha Mitra Edukasi, 2023.
T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.
K. Kunci, “S I S T E M PE N D U K U N G K E PU T U S A N PE N E N T U A N PENERIMA BEASISWA BASIS DENGAN METODE SIMPLE ADDITIVE WEIGHTING.”
M. R. Ramadhan, M. K. Nizam, and Mesran, “Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Siswa-Siswi Berprestasi Pada Sekolah SMK Swasta Mustafa,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 459–471, 2021.
Asminah, “Penerapan Metode Simple Additive Weigthing Untuk Penentuan Level Kondisi Penyandang Disabilitas,” Build. Informatics, Technol. Sci., vol. 3, no. 4, pp. 559–565, 2022.
Khairul;, M. Simaremare, A. Putera, and U. Siahaan, “Decision Support System in Selecting The Appropriate Laptop Using Simple Additive Weighting,” Int. J. Recent TRENDS Eng. Res., vol. 2, no. 12, pp. 215–222, 2016.
R. P. Sari and M. R. Maulana, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” J. Sist. Komput. dan Inform., vol. 2, no. 3, pp. 472–478, 2021.
A. Setyawan, F. Y. Arini, and I. Akhlis, “Comparative Analysis of Simple Additive Weighting Method and Weighted Product Method to New Employee Recruitment Decision Support System (DSS) at PT. Warta Media Nusantara,” Sci. J. Informatics, vol. 4, no. 1, pp. 34–42, 2017.
M. Badaruddin, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Menerapkan Kombinasi Metode Simple Additive Weighting (SAW) dengan Rank Order Centroid (ROC),” J. Media Inform. Budidarma, vol. 3, no. 4, p. 366, 2019.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Pendukung Keputusan Pemilihan Mahasiswa Penerima Bantuan Uang Kuliah Tunggal Menggunakan Metode Simple Additive Weighting (SAW)
Published
Issue
Section
Copyright (c) 2023 Nur Wulandari, Nurul Izzah Hadiana, Mesran Mesran, Rohmat Indra Borman, Agus Perdana Windarto

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).